Several studies have demonstrated that beam shaping in laser powder bed fusion (LPBF) can improve the efficiency and productivity of this additive manufacturing process. A collaboration between the Fraunhofer Institute for Laser Technology ILT and RWTH Aachen University has developed an approach to beam shaping to individually optimize LPBF processes. Customized beam profiles improve component quality, reduce material losses and enable previously impossible scaling of the build-up rate of the single beam process. Fraunhofer ILT and the Chair of Technology of Optical Systems at RWTH Aachen University are working together to create a state-of-the-art test system enabling them to flexibly investigate complex laser beam profiles in power classes up to 2 kW, an innovation that can be used to customize solutions for industrial partners. This platform is designed to integrate LPBF processes more efficiently and robustly into industrial production so that they can meet its growing demands. Currently, laser powers of around 300 to 400 watts are common in many LPBF processes. However, the standard Gaussian laser beam they use has significant disadvantages: The high concentration of power in the beam center leads to local overheating and undesirable material evaporation as well as process instability, both of which can impair component quality due to spatter and pores. These issues significantly limit the scalability of the process, meaning that the laser power available in LPBF systems — often up to 1 kW — cannot be utilized for most materials. With the system currently under construction, liquid crystal on silicon-spatial light modulators (LCoS-SLMs) can be used to generate almost any beam profile in the LPBF process by selectively bending the phase front of the laser beam. Courtesy of Fraunhofer ILT. “One way to speed up the process is to use several lasers and optical systems in parallel,” said Marvin Kippels, PhD student in the Laser Powder Bed Fusion Department at Fraunhofer ILT. “However, the costs scale at least proportionally to the number of systems installed.” In addition, these systems cannot always be utilized homogeneously in real applications, which means that productivity cannot be increased proportional to the increase in power. A promising approach is, therefore, to increase the productivity of the single beam process, which can also be transferred to multibeam systems. Previous studies have shown that even simple beam shapes with rectangular, ring-shaped, or a combination of two Gaussian distributions produce promising results for both component quality and process speed. The potential of more complex beam shapes has so far been largely unexplored because the necessary system technology was lacking. This is now changing thanks to the comprehensive investigations that researchers at Fraunhofer ILT have begun. “The interaction of laser beam and material in the process is so complex due to its dynamics that simulations can only provide indications of the actual melt pool behavior,” said Kippels, who is currently setting up a new type of system that uses liquid crystal on silicon-spatial light modulators (LCoS-SLMs), which will enable researchers to investigate almost any beam profile in the LPBF process. As it has a laser power of up to 2 kW, the innovative system is a platform for testing new beam shapes at very high power levels in the LPBF process, which allows the suitable system technology to be identified for an individual LPBF task. “We can optimize the LPBF process in a targeted manner,” Kippels said. He refers specifically to less material evaporation, less spatter formation, reduced melt pool dynamics, smoothened melt track surface, and increased process efficiency by adapting the melt track geometry. Currently, system technology is often promoted as able to produce specific beam shapes such as ring or top hat profiles. However, the choice of these beam shapes is not based on an in-depth understanding of the underlying process mechanisms, which is reflected in the sometimes-contradictory literature on the subject. Only by fundamental understanding the processes can research specifically define which adjustments achieve a defined target, such as a certain melt track geometry. This means that a beam shape must be developed and optimized for the application, which can then ideally be implemented in the company without needing LCoS-SLM technology. Thanks to this research platform, industrial customers and project partners of Fraunhofer ILT can already benefit from unprecedented flexibility in researching the laser-beam tool. “We are still at the very beginning, but we can already see the enormous potential that beam shaping can offer for the LPBF process,” said Kippels. “There is no one perfect beam shape; every application has its own requirements. Thanks to our flexible beam shaping, we can find the ideal distribution for each process, the best process parameters for the task in question.” Fraunhofer ILT will present the developed test system, which is currently under construction, at Formnext in Frankfurt am Main from Nov. 19-22.