Manufacturing plastic solar cells by the meter
Dr. Barbara Stumpp
The conventional solar cell is
powerful, but heavy and expensive. For applications such as tents or car roofs,
a more suitable option would be flexible organic photovoltaics (OPVs) printed on
plastic foil. OPVs work well in low-light conditions, but their efficiency is poor,
and they cannot be produced cost-effectively, given their expected life span.
There are two major problems to solve. First, the OPV cell’s
efficiency, currently at about 6 percent, must be increased to 8 to 10 percent,
over a life span of two to three years. Also, there is a need for a large-scale
production process to bring the cost per watt or per square meter down to an acceptable
level. The project’s goal is to reduce the price to below €1 per watt
peak (W/p), and to come close to €0.5/Wp by 2020.
This device consists of modules that can be recombined, depending on the product being manufactured.
A consortium of German companies and research institutes is working
to solve these problems as part of a government initiative known as EPIO (evaluation
and exploration of concepts for the production and integration of OPVs in the application
areas of architecture, life sciences and textiles, No. 13N10315). The laser micromachining
company 3D-Micromac of Chemnitz is responsible for the systems engineering and laser
processes. Hexonia of Nettetal, which develops and fabricates high-technology textiles,
will integrate the OPV prototypes created during the project into textiles. In Potsdam,
the architectural firm Freiräumer is developing bus shelters that integrate
the OPVs. Varta Micro Battery of Ellwangen will develop the necessary flexible accumulator
technology. Fraunhofer Institute for Applied Polymer Research and the Institute
for High-Frequency Technology of Braunschweig Technical University will develop
the structure of the cells and the necessary processing steps. The Institute for
Print and Media Technology at Chemnitz University of Technology will serve as a
printing technology partner.
A flexible laser-structured organic solar cell. Images courtesy of 3D-Micromac.
The project partners want to produce flexible OPVs on a large
scale and in a way that is suitable for mass production. The starting point for
an OPV is a polyethylene terephthalate foil covered with a transparent, electrically
conductive contact layer, usually made of indium tin oxide (ITO). On this is a layered
stack of the polymer mixture polystyrene sulfonate, the future active layer. On
top of this, an adaptation layer is deposited; for example, lithium fluoride and
aluminum act as the back contact.
This sounds simple, but several things must be observed to ensure
the correct treatment of the ITO-coated foil. The difficulty is achieving an even
distribution of the printed functional layers over the complete substrate surface,
because the wet films have a thickness of only a few microns. The next step is the
encapsulation of the cells; the quality of the result significantly affects the
life span of OPVs because moisture and oxygen degrade the active material. To structure
the layers, laser radiation should be used because of its precision and flexibility.
The OPV production process requires only ambient – not vacuum – conditions.
Unlike other processes, this method will harness the great flexibility
of the laser beam for patterning the organic solar cells. The availability of picosecond
lasers and, more recently, industry-standard femtosecond lasers on the market offers
the chance to use cold ablation for structuring the OPV. With the cold ablation
process, the laser pulses are so short that, ideally, no energy transfer takes place
in the material. The laser energy breaks up the chemical bonds only in the top plastic
layer. In this way, the laser can selectively remove material as precisely as an
etchant in microelectronics, and it can process plastics without damaging them.
The layers and the aluminum rear electrode are processed in this way. Furthermore,
the laser welds the foils during encapsulation.
During the project, various ultrashort-pulse lasers with wavelengths
in the infrared range are being used. Both picosecond and femtosecond lasers can
remove the ITO layer very effectively, and at the 1064-nm wavelength, the process
window is large enough for stable ablation. This is particularly important in terms
of roll-to-roll laser structuring. The process has also benefited organic LED (OLED) development:
“From the OLED production, knowledge in the field of laser patterning of conductive
substrates and thin layers in general can be used. And vice versa: EPIO has a positive
influence on future OLED research,” noted Jens Hänel, head of research
and development for 3D-Micromac.
Close-up of a MicroFlex module by 3D-Micromac. In the future, it will be used to manufacture OPVs.
In the future, this laser processing method will allow extensive
and efficient mass production of organic solar cells. With the results developed
over the course of the project, 3D-Micromac will be in a position to offer manufacturing
lines for low-cost production of OPVs and other elements of flexible electronics,
from the raw materials to the complete encapsulated cell. A study by market research
institute NanoMarkets confirms that this approach is the right way to go, with sales
currently amounting to $25 million and an expected increase to $342 million in 2015.
The project, which began in 2009, is supported by the BMBF –
the German Federal Ministry of Education and Research. The closing date for the
project is February 2012.
Meet the author
Dr. Barbara Stumpp is a freelance journalist in Freiburg, Germany; e-mail:
bstumpp@gmx.de.
LATEST NEWS
- Infleqtion, Thorlabs Partner on Quantum Commercialization: Briefs: 10/4/24
Oct 4, 2024
- Valens Semiconductor Develops MIPI A-PHY-Compliant Chipsets
Oct 4, 2024
- OLED Tech Provides Optogenetic Light Source for Cochlear Implants
Oct 3, 2024
- NTT and NEC Enable Sensing in IOWN All-Photonics Network
Oct 3, 2024
- Polar Light, Finetech Partner on MicroLED Tech for Advanced Applications
Oct 2, 2024
- TOPTICA Photonics Appoints Two to C-Suite Positions: People in the News: 10/2/24
Oct 2, 2024
- European Initiative's Quantum Sensors Aim to Deliver Climate Insights
Oct 1, 2024
- IonQ Awarded $54.5M Contract with U.S. Air Force Research Lab
Oct 1, 2024