Photonics Dictionary

In general, changes in one oscillation signal caused by another, such as amplitude or frequency modulation in radio which can be done mechanically or intrinsically with another signal. In optics the...

The highest frequency at which a laser diode can be driven and still be modulated acceptably that further results in the maximum rate of change (modulation) in output frequency that can be obtained...

Rate at which optical radiation or a signal is varied through the use of a mechanical or electronic chopper. Also called chopping frequency.

A method of spectral analysis in which some property of the sample is varied and the corresponding change is measured. The change is induced by a repetitive perturbation such as an electric field,...

MTF analysis/measurement equipment refers to instruments and tools used to measure and analyze the modulation transfer function (MTF) of optical systems. The MTF is a quantitative measure of the...

Also called sine wave response and contrast transfer function. The modulation transfer function is the ratio of the modulation in the image to the modulation in the object as a function of frequency...

Acousto-optic modulation refers to the process of using acoustic waves to modulate the properties of light passing through an optically transparent material. This modulation occurs due to the...

The amplitude modulation through the application of modulating voltage to the cathode circuit.

A method of coding image data by storing in memory only differences in brightness of each pixel from that of its nearest horizontal neighbors: that is, it is the change in brightness rather than the...

Modulation transfer function of an optical element when used for transporting images from a lambertian source such as phosphors.

A type of modulation spectroscopy that measures spectral reflectance or transmittance changes induced by applying a perturbing electric field. It can be performed in contactless modes with no special...

The process in which the electron beam of a cathode-ray tube varies in intensity in accordance with the magnitude of the signals it receives.

A technique for detecting and measuring atmospheric pollution, in which an oscillating mirror directs half the incoming light to a transducer that controls amplitude and frequency, and the resulting...

A light therapy that utilizes nonionizing light sources, including lasers, LEDs, and broadband light, in the visible and infrared spectrum. It is a nonthermal process involving endogenous...

Power modulation refers to the intentional variation of power levels in a signal, often in the context of electronic communication systems. This modulation technique is used to encode information...

System of information coding in which the signal is sampled 8000 times per second and the samples quantized by referring them to a series of preset 8-bit codes. Thus digitized, the signal is sent to...

Self-phase modulation (SPM) is a nonlinear optical phenomenon that occurs when an intense laser beam passes through a medium, causing a change in the phase of the light due to its interaction with...

A method of measuring negatively charged phase ions using a color-center or lead-salt diode laser.

The intensity regulation of a cathode-ray tube by alteration of the grid-cathode voltage.

A method of storing digital data using techniques that consume less memory space than basic methods do. See differential pulse code modulation; run end coding; run length coding.

The modulated transfer function (MTF) is a measure used in optical engineering and imaging science to describe the ability of an optical system to transfer the contrast of an object to an image. It...

Acousto-optic deflection refers to a phenomenon where the trajectory of light is altered by acoustic waves propagating through a material. This effect is utilized in acousto-optic devices, which are...

Acousto-optic diffraction refers to the process where light passing through an optically transparent material is diffracted due to the modulation of its refractive index by an acoustic wave...

An acousto-optic modulator (AOM) is a device that utilizes the acousto-optic effect to modulate the amplitude, phase, frequency, or polarization of a laser beam or other coherent light source. It...

An acousto-optic modulator (AOM) is a device that utilizes the interaction between sound waves and light waves to modulate or control the intensity, frequency, phase, or direction of laser beams. It...

Acousto-optics is a branch of physics that deals with the interaction of sound waves (acoustic waves) and light waves (optical waves) within a medium. It primarily focuses on phenomena where acoustic...

The acousto-photorefractive effect refers to a phenomenon in which acoustic waves (sound waves) interact with light waves (photons) within a photorefractive material, resulting in changes in the...

Analog-to-analog (AA) refers to the process or system that involves the conversion or transmission of analog signals from one form to another, without converting them into digital signals at any...

In optics and photonics, ceramics refer to advanced ceramic materials that possess unique optical properties, making them suitable for various applications involving the manipulation and control of...

A deliberately nonlinear amplitude modulation that strengthens weak signals and reduces strong signals for transmission.

Continuous wave (CW) refers to a type of signal or transmission where the signal is constant and does not vary with time. In various contexts, the term is used to describe continuous, uninterrupted...

A chart, either printed on paper or prepared photographically on glass plates or film, that consists of 3-bar resolution test objects, sine-wave test objects for modulation transfer function...

Digital signal processing (DSP) refers to the manipulation and analysis of signals, which are representations of physical quantities that vary over time or space. In the context of DSP, these signals...

An electro-optic deflector is a device that can change the direction of light beams using an electric field. It operates based on the electro-optic effect, which involves the modulation of the...

An electro-optic modulator (EOM) is a device used to modulate the amplitude, phase, or polarization of light waves using an external electrical signal. Electro-optic modulation is a fundamental...

An electron lens consisting of a homogeneous axial electric field and a magnetic field used in high-quality image tubes for high modulation transfer function and small geometrical distortion...

The method by which photographic film is scanned by an electron beam. One technique uses the uniform light of a television screen, focused by a lens onto the processed film, as a means of creating a...