Photonics Dictionary: F

A multiple-beam interferometer, usually consisting of two flat plates, with high reflective ability. The plates are set parallel to one another by spacers so that lightwaves may bounce back and forth...

A means of determining a prism's index of refraction by placing the prism so that its emergent face is perpendicular to the incident beam. This arrangement permits the determination of the prism's...

A device in which slab geometry internally compensates for thermal-optic distortion; the solid host material -- glass or Nd:YAG -- is in the form of a rectangular slab with plane parallel faces. The...

A device used to transmit and receive images that have been converted to electrical signals over regular telephone lines; it includes a scanner, a transmitter, a receiver and a printer.

Measurement of the interval during which a photodetector's signal and output current drops from 90 to 10 percent.

A secondary halo whose movement counterpoints the behavior of the Becke line.

Entirely analogous to color photography, but inclusive of light bands that do not appear in the visible spectrum.

A set of rays through a lens originating at a common point and contained in one plane.

A grating with very coarse rulings to match the long wavelengths in the far-infrared region. In the most efficient ruling method, grooves are cut in plane, solid aluminum alloy blanks.

The fiber optic connector standard for Nippon Telephone & Telegraph (NTT) installations, developed with Nippon Electric Co. (NEC).

The differential luminance threshold divided by the luminance.

A femtosecond laser is a type of laser that emits ultrashort pulses of light with durations on the order of femtoseconds, where one femtosecond is equal to 10-15 seconds. These lasers are capable of...

A fiber Bragg grating (FBG) is a type of optical filter that is inscribed or "written" into the core of an optical fiber. It consists of a periodic modulation of the refractive index along the length...

A method of optical fiber coupling in which the fibers are ground down to expose their cores and placed together to allow light pulses to transfer from one to the other.

A fiber laser is a type of laser in which the active gain medium is an optical fiber doped with rare-earth ions such as erbium, ytterbium, or neodymium. Fiber lasers generate coherent light through...

A fiber optic cable assembly refers to a complete unit consisting of optical fibers, connectors, protective jackets, and other components that are assembled together to facilitate the transmission of...

A plate made up of thousands of glass fibers arranged parallel to one another, i.e., in a coherent bundle, and fused together so that it is hermetically tight. It transfers an image from one plane to...

A fiber optic gyroscope (FOG) is a type of gyroscope that uses the interference of light waves to detect changes in orientation or rotation. It operates based on the principle of the Sagnac effect,...

A fiber optic imaging bundle is a specialized optical device composed of multiple optical fibers bundled together. Each fiber optic strand within the bundle acts as a conduit for transmitting light....

A fiber optic preform is a cylindrical glass rod or tube used as the starting material for manufacturing optical fibers. It serves as the precursor from which optical fibers are drawn. The process of...

A fiber optic sensor is a device that uses optical fibers to detect and measure physical, chemical, biological, or environmental parameters. Unlike traditional electrical sensors, fiber optic sensors...

A fiber optic spectrometer is a device used for measuring the spectral content of light. It utilizes optical fibers to transmit light from a source to a spectrometer unit, where the light is...

A coherent fiber optic bundle made from fibers whose diameter changes gradually along its length. Used to magnify or reduce the input image.

A fiber optic transceiver, often simply referred to as an "optical transceiver," is a device used in fiber optic communications to transmit and receive data over optical fibers. It integrates both a...

The face of a cathode-ray tube (CRT) that has a fiber optic sheet attached to its surface. The sheet's fibers are at right angles to the face, allowing the transmittance of the fluorescent trace...

An optical recording technique that uses light source(s), a beamsplitting cube, light detector(s) and an optical fiber chronically implanted in animal brain to deliver excitation light to neurons...

A microscope in which laser light is delivered through single-mode fibers that replace the pinhole usually used in confocal microscopy. When the Gaussian mode is imaged from the fiber output onto the...

A fiber-coupled LED (light-emitting diode) refers to an LED device that is optically coupled to an optical fiber for the purpose of efficient light transmission. In this configuration, the LED serves...

A fiber-coupled photoconductive antenna (FCPA) is a type of optoelectronic device that combines a photoconductive antenna with optical fibers for the purpose of generating or detecting terahertz...

A method of terminating optical fibers by forming a lens directly on the end of the fiber, eliminating the need for precise end-to-end placement or epoxy sealing in fiber connections.

1. In raster scan television, one of the two scans that are interlaced to make up a frame. 2. See field of view.

A photodetector employing photoregeneration of carriers in the channel region of an FET structure to provide photodetection with current gain.

An X-Y electrically addressable series of arrays with individual electron emitters bombarding a phosphor-coated transparent plate. The phosphor is induced into luminescence, similar to traditional...

An image-forming instrument in which a strong electrostatic field causes cold emission of electrons from a sharply rounded point or from an object that is located on that point. The electrons are...

The field of view (FOV) refers to the extent of the observable world or the visible area that can be seen at any given moment through a device, such as an optical instrument, camera, or sensor. It is...

An aperture located at an image plane of an optical system that determines the size and shape of the image.