Definitions

A lens or mirror surface that is perfectly flat.

A lens with one plane surface and one concave surface.

A lens that has one plane surface and one convex surface.

A gas made up of electrons and ions.

A plasma accelerator is a type of particle accelerator that uses electric fields and magnetic fields to accelerate charged particles, typically electrons or ions, by exploiting the motion of charged...

The use of a plasma to induce the formation of oxides in the production of graded-index optical fibers.

A type of flat panel display made up of a layer of gas between two glass plates. The glass is coated with parallel conductors that form cells which, when energized, produce a gas discharge that makes...

Operates with light collectively emitted by the recombination of free electrons and ions in the plasma state.

Introduced into the laser beam from localized fluctuations in current density within the plasma itself. These fluctuations represent macroscopic changes of gain in the laser.

The study of highly ionized gases. Many phenomena not exhibited by uncharged gases are associated with plasma physics.

Plasma's ability to stop the transmission of laser light.

An electron beam gun in which plasma that is generated within a low-voltage hollow-cathode discharge serves as the source of electrons.

Monolithic self-scanning linear image sensor array for multichannel spectroscopy with a spectral range of from 200 to 1000 nm.

Calculated quantity of the entire longitudinal wave of a solid substance's electron gas.

Plasmon ion-assisted deposition (PIAD) is a technique used in thin-film deposition processes, particularly in the production of optical coatings. This method combines two key processes: plasmon...

Plasmonics is a field of science and technology that focuses on the interaction between electromagnetic radiation and free electrons in a metal or semiconductor at the nanoscale. Specifically,...

Fiber in which both core and cladding are made of plastic.

The direct cladding used for fused silica cores to create large numerical aperture fibers and used as overcoats to glass-clad fibers to reduce microbend loss and increase mechanical protection.

A lens made from transparent plastic material. Lenses over 31/2 in. in diameter are usually machined, ground and polished. Smaller lenses are usually injection molded, the mount surrounding the lens...

Plastic optical fiber (POF) is a type of optical fiber made from transparent plastic, typically polymethylmethacrylate (PMMA) or polycarbonate. Unlike traditional glass optical fibers, which are made...

Plastic optics refers to optical components or systems that are made from transparent plastic materials, as opposed to traditional optical components made from glass or other materials. Plastic...

Polishing with a plastic pad.

An optical waveguide having a silica core and a plastic cladding.

Any crystalline material whose length is much less than its measured diameter.

A semiconductor material used in photodetectors, sensitive in the infrared up to 5 µm.

Geometrical partition possible with a sphere that can be four, six, eight, 12 or 20 solid-angle wedges. Each platonic mass is made up of a given number of regular polygonal faces and is classified...

The property exhibited by certain birefringent crystals in which the degree with which they transmit polarized light is different, depending on whether the ray is ordinary or extraordinary. An...

Pluggable optics, also known as pluggable transceivers or optical transceivers, are modular devices used in optical communication systems to transmit and receive data over optical fibers. They are...

Philips trade name for a lead oxide low-light-level vidicon tube.

A mixture of ionized gas and metal vapor generated by impingement of the laser beam onto a material being welded or a weld joint. The plume causes absorption and/or scattering of the incident laser...

A transparent lead-lanthanum zirconate titanate ceramic with optical qualities that can be controlled by applying voltages to thin plates of the material.

The transition boundary between P-type and N-type materials in a semiconductor.

Discharge that results when a doped semiconductor crystal with a PN junction is charged with a low-voltage direct current. The dual process depends on excitation caused by electrical energy...

A device used to detect radiant energy by means of the thermal expansion of gas.

In optics, the Pockels effect refers to the phenomenon where the refractive index of a material changes in response to an applied electric field. This effect is utilized in Pockels cells, which are...

A Pockels cell, also known as an electro-optic modulator, is an optical device used to control the polarization of light by applying an electric field. It is named after the physicist Friedrich Carl...

A reference sphere used to represent all possible states of polarization. All linear polarizations will lie on the equator and circular polarizations will correspond with the poles. Named for the...

A point cloud is a set of data points in a three-dimensional coordinate system, where each point represents a specific location in space. These points are typically obtained through various sensing...

1. With respect to angular subtense, a source of light, such as a star, that is very small. In a lab, a point source may be simulated by imaging a large source onto and through a pinhole, or by...

An established point on which the observer's eye is focused.

In digital image processing, a subcategory of frame processing that transforms pixel brightness and contrast through use of a mapping function. Point processing can be single-image (simple contrast...

A lamp, usually incandescent, that has a very compact filament, permitting a greater concentration of emitted light, aided by the use of small apertures and appropriate reflectors.

The point spread function (PSF) is a fundamental concept in imaging that describes the response of an imaging system to a point source or point object. It characterizes how a single point of light is...

A crystal diode whose rectifying activity is determined by the touching of the crystal to a finely pointed wire surrounded by a material of opposite type.

A device used in solar systems to direct mirror-reflected sunlight to a heat absorber and heat-driven engine, which turns a generator to produce electricity.

A method of producing magnified images by x-rays. The specimen is placed close to a point source of x-rays; the magnification achieved is the ratio of source-image to source-object distance....