Photonics Dictionary

Also known as constant angle or constant deviation fringes. The interference fringes observed with dense flat plates near normal incidence. The fringes of the Fabry-Perot interferometer are Haidinger...

Triggering a laser at a predetermined time by pumping it to a level just below its threshold and then using an auxiliary source that quickly pumps it above threshold. Means of achieving it in laser...

1. In a cathode-ray tube, the glow surrounding a bright spot that appears on the fluorescent screen as the result of the screen's light being reflected by the front and rear surfaces of the tube's...

The term half bandwidth (HBW) generally refers to the width of a spectral band or frequency range at half of its maximum amplitude. It is commonly used in the context of signal processing, optics,...

A communications system that can transmit in only a single direction at a time. See duplex.

Describing a surface that is coated with a film of metal of such thickness that it transmits about one-half of the incident light and reflects about one-half.

1. The value on either the leading or the trailing edge of a laser pulse at which the power is one-half of its maximum value. 2. The wavelength at which a filter is transmitting one-half of its peak...

A plate containing a uniform pattern of transparent holes in an opaque background, the clear area being nearly equal to the opaque area. Used in the printing process.

In chemistry, a halide refers to a chemical compound containing one or more halogen atoms bonded to another element. The halogens are a group of elements in the periodic table that includes fluorine...

The development of a transverse electric field in a solid material when it carries an electric current and is placed in a magnetic field that is perpendicular to the current.

1. The faintly hued ring that is seen to surround a light source viewed through fog or light clouds. The size of scattering particles determines the size of the ring. 2. The ring surrounding a...

Text or images printed on paper or another tangible medium, as opposed to those viewed electronically on a cathode-ray-tube screen.

High-modulus elastic fibers that exhibit the following differences from conventional elastic fibers: Increasing temperature decreases recovery force (the fibers are enthalpic vs. conventionally...

A type of optical fiber in which a silica core is surrounded by a hard polymer or similar material much stronger than the customary cladding material.

Harmonic generation refers to a nonlinear optical process in which incoming photons interact with a material and produce new photons at integer multiples of the frequency of the incoming photons....

An instrument designed to calculate the amplitude and phase of the different harmonic elements of a radiation wave utilizing a graph of the wave.

An aggravated form of fog in a polished surface caused by the scattering of light. The defects causing haze are larger than those causing fog, but singly are not large enough to be seen by the...

The ratio between the luminescence of an object and the luminescence of the scattering medium through which it is being viewed.

An optical system that superimposes a synthetic display providing navigational or weapon-aiming information on a pilot's or driver's field of view. The system includes a cathode-ray tube, collimating...

A calorimetric calculation from which the temperature vs. time dependence of any point on a sample can be determined, provided surface and bulk absorption, thermal conductivity and heat transfer...

A type of cooling system in which one fluid is used to carry heat off another without direct contact between the two.

A heat sink for a laser is a device designed to absorb and dissipate the excess heat generated by the laser during operation. This is crucial to maintain the laser's performance, prevent overheating,...

The process of subjecting glass to temperature cycling to produce physico-chemical reactions that alter its properties. Similar processes can be accomplished with a laser -- most commonly a CO2,...

Glass that has been specially treated so that it will not shatter when exposed to high temperatures followed by immediate and rapid cooling.

A guided missile that uses an infrared sensor to detect and home in on an enemy target. The missile is guided by the high infrared emissions produced by a target, such as the heat from an aircraft or...

In the SI system, prefix meaning one hundred, 102.

A gas lamp used in the early 1900s as a physical standard for measurement of luminous intensity. The Hefner unit was superseded by the candle and then by the candela.

A rangefinder used to determine the height or altitude of aerial targets by means of optical triangulation. The device employs the stereoscopic principle.

An instrument designed to record the duration and intensity of solar radiation.

A device having a plane mirror so mounted that it can be set to reflect sunlight into a piece of laboratory equipment. It is driven by a clock to compensate for the sun's daily motion around the pole...

A helium-neon (HeNe) laser is a type of gas laser that emits visible red light at a wavelength of 632.8 nm. It operates based on the principle of stimulated emission of photons from excited helium...

The capability of the spatial distributions of incident and reflected flux to interchange completely without alteration of the measured reflectance.

A material used in photodynamic therapy that is retained selectively by tumor tissue when injected into the body; it then fluoresces when exposed to blue light and necroses when exposed to red laser...

Laser cavity bounded by a plane mirror and a concave spherical mirror with the plane mirror located at the center of curvature of the concave mirror.

The inductance of a closed circuit in which an electromotive force of one volt is produced when the electric current in the circuit is varied uniformly at a rate of one ampere per second.

The total fusion and sealing of materials, or usually an enclosure, to ensure that they are airtight.

Laboratory experiments that focus on demonstrating new capabilities of a certain technology or device, usually without consideration of industrial or commercial practicality.

The decrease in effect in developable density on a photographic plate formed by a second exposure to radiation having a longer wavelength, usually red or infrared.

The Higgs boson is a fundamental particle associated with the Higgs field, a field that permeates the universe and is responsible for giving mass to other fundamental particles through the mechanism...

In plano work, that property of a surface determining that it is convex and contacts a flat test glass at its center.

A term used to describe a photograph, film or television picture where the values for black and white areas are at or near their limits, thereby giving the maximum degree of difference between them.

High dynamic range (HDR) refers to a technology that allows for a broader and more dynamic range of luminosity in visual content, such as images or videos. It is particularly associated with displays...

High harmonic generation (HHG) refers to a nonlinear optical process in which intense laser light interacts with a gaseous medium, typically an atom or a molecule, to produce harmonics of the...