Photonics Dictionary

The signal-to-noise ratio (SNR) obtained with a Fourier transform spectrometer when detector noise prevails, which exceeds the SNR of a scanning spectrometer in the same time by a factor proportional...

A femtosecond laser is a type of laser that emits ultrashort pulses of light with durations on the order of femtoseconds, where one femtosecond is equal to 10-15 seconds. These lasers are capable of...

The principle that a light ray extending from one point to another will, after any number of reflections and refractions, follow the path requiring the least transit time. This is also known as the...

The mathematical expression of the probability of any given state of energy being occupied when a semiconductor is in thermal equilibrium.

The region of a ferroelectric crystal where spontaneous polarization is uniformly directed.

The properties of certain materials that cause them to have relative permeabilities that exceed unity. This permeability permits the materials to exhibit hysteresis.

A prism with curved faces that collimates, reflects and refracts incident light. Often used in the production of spectrographs.

The mechanical centerline through the core of an optical fiber.

The lowest frequency at which the magnitude of the fiber transfer function decreases to a specified fraction of the zero frequency value. Often, the specified value is one-half the optical power at...

A fiber Bragg grating (FBG) is a type of optical filter that is inscribed or "written" into the core of an optical fiber. It consists of a periodic modulation of the refractive index along the length...

A rigid or flexible, concentrated assembly of glass or plastic fibers used to transmit optical images or light. See aligned bundle; incoherent bundle.

A phenomenon in which high optical power, encountering an imperfection in an optical fiber, destroys the fiber's core and causes damage to back-propagate down the fiber. It is caused by classic...

Fiber joints, also known as fiber optic splices, refer to the connection points where two optical fibers are permanently joined together to form a continuous optical transmission path. These joints...

A fiber laser is a type of laser in which the active gain medium is an optical fiber doped with rare-earth ions such as erbium, ytterbium, or neodymium. Fiber lasers generate coherent light through...

A fiber optic cable assembly refers to a complete unit consisting of optical fibers, connectors, protective jackets, and other components that are assembled together to facilitate the transmission of...

A package for an optical fiber or fibers that may include cladding, buffering, strength members and an outer jacket.

A device used to prepare optical fiber end faces; a scribe line made by the cleaver's blade propagates across the fiber, resulting in a clean break.

A fiber optic gyroscope (FOG) is a type of gyroscope that uses the interference of light waves to detect changes in orientation or rotation. It operates based on the principle of the Sagnac effect,...

A fiber optic imaging bundle is a specialized optical device composed of multiple optical fibers bundled together. Each fiber optic strand within the bundle acts as a conduit for transmitting light....

A fiber optic preform is a cylindrical glass rod or tube used as the starting material for manufacturing optical fibers. It serves as the precursor from which optical fibers are drawn. The process of...

A scanner in which a fiber optic assembly replaces a lens system.

A device used for coding messages and having a fiber bundle that is aligned at both ends and scrambled in the middle, potted and cut. The resulting halves of the bundles serve as encoders or decoders...

A fiber optic sensor is a device that uses optical fibers to detect and measure physical, chemical, biological, or environmental parameters. Unlike traditional electrical sensors, fiber optic sensors...

A coherent fiber optic bundle made from fibers whose diameter changes gradually along its length. Used to magnify or reduce the input image.

A fiber optic transceiver, often simply referred to as an "optical transceiver," is a device used in fiber optic communications to transmit and receive data over optical fibers. It integrates both a...

The face of a cathode-ray tube (CRT) that has a fiber optic sheet attached to its surface. The sheet's fibers are at right angles to the face, allowing the transmittance of the fluorescent trace...

The use of thin flexible glass or plastic fibers as wave guides — or "light pipes" — to channel light from one location to another. Fiber optics is based off of the principle of total...

An optical recording technique that uses light source(s), a beamsplitting cube, light detector(s) and an optical fiber chronically implanted in animal brain to deliver excitation light to neurons...

The distance between the surface of a ferrule and the surface of a fiber end, provided that the ferrule extends above the fiber end. If the fiber end extends above the ferrule surface, the difference...

A microscope in which laser light is delivered through single-mode fibers that replace the pinhole usually used in confocal microscopy. When the Gaussian mode is imaged from the fiber output onto the...

A fiber-coupled LED (light-emitting diode) refers to an LED device that is optically coupled to an optical fiber for the purpose of efficient light transmission. In this configuration, the LED serves...

A method of terminating optical fibers by forming a lens directly on the end of the fiber, eliminating the need for precise end-to-end placement or epoxy sealing in fiber connections.

Relation between a material's transport rate and the material's concentration gradient and the diffusion coefficient.

One or more spots placed in the field of view of an optical system to provide a means of reference.

1. In raster scan television, one of the two scans that are interlaced to make up a frame. 2. See field of view.

An X-Y electrically addressable series of arrays with individual electron emitters bombarding a phosphor-coated transparent plate. The phosphor is induced into luminescence, similar to traditional...

An image-forming instrument in which a strong electrostatic field causes cold emission of electrons from a sharply rounded point or from an object that is located on that point. The electrons are...

A handheld binocular telescope that is commonly of the Galilean type.

1. A lens situated at or near the plane of an internal image to project the aperture of a previous objective or erector upon the aperture of a following lens. 2. A lens at or near the plane of a...

An expression of the tolerance of decentration of a laser diode from the optical axis: the region around the axis in the focal plane of the collimator in which the facet can be located and still...

The field of view (FOV) refers to the extent of the observable world or the visible area that can be seen at any given moment through a device, such as an optical instrument, camera, or sensor. It is...

An aperture located at an image plane of an optical system that determines the size and shape of the image.

Secondary aberrations remaining after the primary (Seidel) aberrations have been corrected.

The allowable departure from the given figure or geometrical form. It may be described in terms of fringes or wavelengths.