Definitions: R

A type of multiple-pass amplifier in which no optical leakage is allowed until a finite number of passes has occurred; at this time the entire cavity output is released as one pulse.

A repeater that is designed for digital transmission. Also called a regenerator.

Image processing operations performed on one area of an image.

A shift in the apparent position of an object when an optical element is added or removed.

The part of incident flux that is transmitted with no scattering.

The ratio of the diameter of the entrance pupil in an optical system to the equivalent focal length of that system. The relative aperture is denoted as a fraction in which f, the equivalent focal...

A figure of merit corresponding to the amount of light seen by a viewer through binoculars. A higher number indicates a brighter image in low-light situations. The relative brightness value is...

A plot showing how the response (ability to detect a signal) varies with wavelength. D(l).

The steady state of temperature exhibited by a material that has absorbed and emitted radiation equally.

The ratio of the velocities of light in two adjacent media, neither of which is air.

The inherent laser amplitude noise relative to the average optical power produced by the laser; the RIN decreases rapidly as current is increased.

The quantity equal to the refractive index of one medium divided by that of a second medium.

A form of lens assembly used in a projection system to maximize efficiency and assure uniform illumination of the object being projected.

A lens or lens system used to transfer a real image from one point within an optical system to another, with or without magnifying it.

The discernment of depth or apparent difference in distance that causes the object to stand out from its background because of stereoscopic vision. The impression of relief can be obtained from the...

The unit of the dose of any radiation that produces the same biological effect as one roentgen of x-ray.

A device employed to identify toxic agents lingering on the ground or in the air from up to three miles away, by using laser beams to detect infrared light-absorption patterns that can be analyzed to...

A display device, such as a cathode-ray tube, that is located at some distance from the source generating the displayed information.

Remote inspection refers to the process of inspecting, evaluating, or monitoring assets, equipment, infrastructure, or systems from a distance, typically using remote sensing technologies and...

A robotic process commonly employed by automakers that enables high-speed and flexible production throughput by using swiveling optics for precise beam positioning.

Remote sensing is a method of data collection and observation where information about objects, areas, or phenomena on Earth's surface is gathered from a distance, typically using sensors onboard...

The degree to which a predetermined or previous setting of a positioning device can be duplicated by observance of the optical phenomena.

A pulsed laser that emits a recurring pulsed output. Frequency of the pulses emitted is known as pulsed recurrence frequency (PRF). When the PRF or duty cycle is very high, repetitively pulsed lasers...

A reproduction made of an original grating -- usually by casting thermosetting plastics onto the original -- to avoid the high expense of making the original gratings.

Optical components, usually reflectors, produced using proprietary techniques that transfer the precision of a master to a number of elements.

Ratio between map or photo linear distance and the actual ground dimensions represented.

Loss mechanisms that degrade the performance of all thin-film optical devices by removing radiant flux out of the specular beams.

The optical phenomenon in which white light dispersed by small particles in suspension appears blue when viewed through a suitable Nicol prism.

A measurement in optical thin-film coating processes whereby the gases remaining in the vacuum chamber after coating are characterized by mass spectroscopy.

A crucible made of electrically resistive material through which a current is passed to heat the material inside, which then evaporates and is deposited as a thin film on a substrate. Resistance...

A device having electrical resistance and used in an electric current for purposes of protection, operation or control of current.

1. In optics, the ability of a lens system to reproduce the points, lines and surfaces in an object as separate entities in the image. 2. The minimum adjustment increment effectively achievable by a...

A chart on paper or glass containing a series of sets of lines at progressively smaller spacing and used to ascertain the limiting number of lines per millimeter that an optical system is capable of...

A measure of an optical system's ability to produce an image which separates two points or parallel lines on the object. See Rayleigh criterion of resolving power.

Resonance can be defined in various contexts, including physics, chemistry, and music. Here are definitions for resonance in a few different fields: Physics: In physics, resonance refers to the...

The re-emission of absorbed energy, having the same wavelength as the incident energy, in an arbitrary direction from a particle because of an energy level transition within the material.

In atomic fluorescence spectroscopy, fluorescence emitted by an atom at a spectral line of a wavelength identical to that of the stimulating radiation.

A type of ultrasensitive laser spectroscopy that can detect quantities as small as a single atom of some substances and that can differentiate between isobars of different elements.

That radiation emitted by an atom or molecule that has the same frequency as that of an incident particle; e.g., a photon. It generally involves a transition to the lowest energy level of the atom or...

The fluorescent emission spectrum emitted by certain substances following the irradiation of one of these substances with light that is of the same wavelengths as its fluorescence.

A resonator is a device or system that exhibits resonance, which is a phenomenon that occurs when an external force or stimulus is applied at a specific frequency, causing the system to oscillate...