Photonics Dictionary

Capability requirement for optical switches for transmission lines to process arbitrarily polarized light because of the rapid changes in the polarization state of light propagating in the fibers.

Quantitative oblique back illumination microscopy (qOBM) is an advanced imaging technique used in microscopy to achieve high-resolution imaging of biological samples, particularly cells and tissues....

Quantitative phase imaging (QPI) is an advanced imaging technique used in microscopy to measure and analyze the optical phase information of transparent specimens. Unlike traditional brightfield...

Quantum efficiency (QE) is a measure of the effectiveness with which a device or system, typically in the context of photonics or electronics, converts incoming photons (light) into a useful output...

Quantum sensing refers to a class of sensing technologies that leverage principles from quantum mechanics to enhance the precision and sensitivity of measurements. Traditional sensors operate based...

The retina is a light-sensitive tissue layer located at the back of the eye, opposite the lens. It plays a crucial role in the process of vision by converting light into neural signals that are sent...

A ring laser gyroscope (RLG) is a type of gyroscope that uses laser light to detect and measure changes in orientation. It operates based on the Sagnac effect, which is a fundamental principle of...

The light-sensitive cells on the retina of the eye that are responsible for low-resolution, peripheral vision.

Filtered light to which photographic or other photosensitive materials are not responsive; used to illuminate darkrooms when film is being processed. The color of the filter varies according to the...

Short wavelength infrared (SWIR) refers to the portion of the infrared spectrum that encompasses wavelengths roughly between 1,000 and 3,000 nanometers (nm). In the electromagnetic spectrum, infrared...

A mechanical or electronic device used to control the amount of time that a light-sensitive material is exposed to radiation.

A silicon photodiode is a semiconductor device that converts light into an electrical current. It is a type of photodetector specifically designed for detecting and measuring light intensity. Silicon...

An emulsion in which grains of the photosensitive material silver halide are deposited. Each grain, when exposed to light, either develops or fails to develop as a unit, leaving a dark or clear...

An imaging system that uses a mosaic of tiny light-sensitive semiconductors (phototransistors) to produce individual outputs that are then converted into a coherent video signal.

A tiny lens (as small as 100 µm in diameter) used to focus light on charge-coupled devices, formed by heating a photosensitive material exposed through a mask, leaving a pattern of raised...

Surface-enhanced Raman scattering (SERS) is a powerful analytical technique that enhances the Raman scattering signal of molecules adsorbed on or near certain nanostructured surfaces. Raman...

swept-source Raman spectroscopy is an advanced analytical technique that combines the principles of Raman spectroscopy with a swept-source laser system. It enables rapid and sensitive chemical...

A photoconductive cell that uses thallium oxysulfide as the light-sensitive medium.

Time-correlated single photon counting (TCSPC) is a technique used in photon counting applications, particularly in the field of experimental physics, biophysics, and fluorescence lifetime imaging...

Two-photon polymerization (TPP) is a technique used in additive manufacturing, specifically in the field of 3D printing. It involves using a focused laser to polymerize a photosensitive material in a...

The process of microphotography that involves the reduction of the original at a ratio greater than 100 to 1. The process is usually accomplished by the use of a reduced-scale negative, which, in...

Ultraviolet (UV) coatings are specialized optical coatings designed to operate in the ultraviolet region of the electromagnetic spectrum, typically ranging from 10 nm to 400 nm. These coatings are...

In optics, the term vacuum typically refers to a space devoid of matter, including air and other gases. However, in practical terms, achieving a perfect vacuum, where there is absolutely no matter...

Volume Bragg gratings (VBGs) are specialized optical elements that consist of periodic variations in refractive index throughout the volume of a transparent material, typically a photosensitive glass...

Whispering gallery mode (WGM) refers to a phenomenon in wave physics, particularly in optics, where waves, such as light or sound waves, are trapped and circulate along the periphery of a curved...

One of various types of fluorescent screens used to detect x-ray radiation. Photographic film is mildly sensitive to x-rays, but much more sensitive to light. Hence, in photographing x-ray...

An image intensifier that consists of an evacuated tube with a large input phosphor screen at one end. The phosphor screen is in contact with a light-sensitive photocathode that emits electrons....