Search
Menu
CASTECH INC - New Building the Bridge of Light
Photonics Marketplace

Show Filters
Hide Filters
Products by Category

Key Suppliers

Lambda Research Optics, Inc. - Custom Optics
PI Physik Instrumente - Array Alignment ROS HP 8/24
14 products

Optomechanics & Positioning

Clear All Filters xIR scanning xOptomechanics & Positioning x
excelliSCAN
excelliSCAN
SCANLAB GmbH
  • Category: Optomechanics & Positioning / Galvanometers
  • Type: 2 Axis
  • Max. Scan Angle X (degrees): 0.35
  • Repeatablility (µrad): 0.4
  • Weight: 7kg
H138A ProScan Stage
H138A ProScan Stage
Prior Scientific Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Max. Load: 10kg
  • X-Axis Travel Length: 240cm
  • Y-Axis Travel Length: 71cm
  • Stage Type: Motorized
H116 ProScan Stage
H116 ProScan Stage
Prior Scientific Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Max. Load: 25kg
  • X-Axis Travel Length: 255cm
  • Y-Axis Travel Length: 216cm
  • Stage Type: Motorized
H105 ProScan Stage
H105 ProScan Stage
Prior Scientific Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Max. Load: 20kg
  • X-Axis Travel Length: 154cm
  • Y-Axis Travel Length: 154cm
  • Stage Type: Motorized
H101A ProScan™ Stage
H101A ProScan™ Stage
Prior Scientific Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Max. Load: 10kg
  • Height: 68cm
  • X-Axis Travel Length: 114mm
  • Y-Axis Travel Length: 75mm
  • Stage Type: Motorized
  • Driver Included?: Yes
  • Minimum Step Size: 0.01 µm
  • XY Repeatability: 0.7 µm
VantagePro Galvanometer Scanners
VantagePro Galvanometer Scanners
Thorlabs Inc.
  • Category: Optomechanics & Positioning / Galvanometers
  • Type: 1 Axis
  • Repeatablility (µrad): 20
  • Linearity (%): 99.88
  • Overall Height (no mirror): 35.7mm
  • Weight: 0.45kg
  • Housing Diameter: 9.47 mm
  • Max. Beam Diameter: 4 mm or 5 mm Available
  • Mirror Coatings Available: Protected Silver, Nd:YAG
LC 100 Series Sealed Linear Encoders
LC 100 Series Sealed Linear Encoders
Heidenhain Corporation
  • Category: Optomechanics & Positioning / Optical Encoders
  • Type: Linear
  • Encoder Reading: Absolute
  • Max. Distance: 4.24m
Dual-Axis Galvanometer Scan Heads
Dual-Axis Galvanometer Scan Heads
Thorlabs Inc.
  • Category: Optomechanics & Positioning / Galvanometers
  • Type: 2 Axis
  • Max. Beam Diameter: 45mm
  • Max. Scan Angle X (degrees): 22.5
  • Max. Scan Angle Y (degrees): 22.5
  • Small Step Response (µs): 1200
  • Repeatablility (µrad): 10
  • Linearity (%): 99.9
  • Control Electronics: Analog Servo Amplifiers
  • Gain Drift: 50 ppm/°C
  • Mirror Substrate: Fused Silica/SiC/Si
H112 ProScan Stage
H112 ProScan Stage
Prior Scientific Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Max. Load: 25kg
  • X-Axis Travel Length: 302mm
  • Y-Axis Travel Length: 302mm
  • Stage Type: Motorized
  • Linear Slides: 4 mm precision bearings
  • Minimum Step Size: 0.04 µm
  • Stepper Motor: High precision stepper
NanoCube P-616
NanoCube P-616
PI (Physik Instrumente) LP, Motion Control, Air Bearings, Piezo Mechanics
  • Category: Optomechanics & Positioning / Stages
  • Type: Nanopositioning Stage
  • Max. Load: 100g
  • Mass: 0.08kg
  • Height: 4cm
  • X-Axis Travel Length: 0.1mm
  • Y-Axis Travel Length: 0.1mm
  • Z-Axis Travel Length: 0.1mm
  • Linearity Error (entire travel range): 0.1%
  • Min. Incremental Motion: 0.2 nm
  • Sensor Type: acitive sensor
H117 ProScan Stage
H117 ProScan Stage
Prior Scientific Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Max. Load: 10kg
  • X-Axis Travel Length: 114mm
  • Y-Axis Travel Length: 75mm
  • Max. Linear Speed: 100mm/s
  • Stage Type: Motorized
  • Max. Resolution: up to 10 nm
  • Repeatability: ±0.7 µm
H107 ProScan Stage
H107 ProScan Stage
Prior Scientific Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Max. Load: 10kg
  • Height: 63mm
  • X-Axis Travel Length: 112mm
  • Y-Axis Travel Length: 70mm
  • Stage Type: Motorized
  • Linear Slides: 3 mm precision bearings
  • Minimum Step Size: 0.04 µm
  • Stepper Motor: 4 phase, 1 amp per phase micro stepping
Fast Scanning Mirror
Fast Scanning Mirror
Optics for Hire
  • Category: Optomechanics & Positioning / Galvanometers
  • Type: 2 Axis
  • Max. Beam Diameter: 5.5mm
  • Max. Scan Angle X (degrees): 15
  • Max. Scan Angle Y (degrees): 15
  • Overall Height (no mirror): 35mm
  • Resonant Frequency: 20 – 80 Hz
96SLM100-LE2
96SLM100-LE2
Ludl Electronic Products Ltd.
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Max. Load: 2kg
  • Mass: 1.8kg
  • Height: 22mm
  • X-Axis Travel Length: 100mm
  • Y-Axis Travel Length: 75mm
  • Max. Linear Speed: 100mm/s
Optomechanics & Positioning Products

Marketplace Help Need Help?
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.