Photonics Spectra BioPhotonics Vision Spectra Photonics Showcase Photonics Buyers' Guide Photonics Handbook Photonics Dictionary Newsletters Bookstore
Latest News Latest Products Features All Things Photonics Podcast
Marketplace Supplier Search Product Search Career Center
Webinars Photonics Media Virtual Events Industry Events Calendar
White Papers Videos Contribute an Article Suggest a Webinar Submit a Press Release Subscribe Advertise Become a Member


Silicon Photonics Enable Next-Generation Quantum Devices

Researchers at the National Institute of Standards and Technology (NIST) have greatly improved the efficiency and power output of a series of chip-scale devices that generate laser light at different colors while using the same input laser source. The researchers developed on-chip microresonators with optical parametric oscillators that support the operation of a range of distinct quantum technologies, such as miniature optical atomic clocks and quantum computers. These technologies will require simultaneous access to multiple, widely varying laser colors within a small region of space.

Further, because the researchers’ methodology could be applied to existing silicon photonics platforms with heterogeneously integrated pump lasers, the development could enable flexible, coherent light generation across a broad range of wavelengths and with high output power and efficiency.

The researchers began by studying nonlinear optical devices, including those made of silicon nitride, in which the color of the laser light entering a device can differ from the color that exits it. They experimented with converting incoming light into two different frequencies and demonstrated that the conversion process can occur within a silicon nitride microresonator. As the light traveled thousands of times around the ring-shaped microresonator, it grew strong enough to be converted into the two different frequencies. The two colors were then coupled into a waveguide that transported the light to where it was needed.

The dimensions of the microresonator and the color of the input laser light determine which colors are generated. The researchers fabricated several different microresonators, each with slightly different dimensions, to provide access to a range of output colors on a single chip, all from the same input laser.

Although this was an important first step, the process was found to be highly inefficient, converting less than 0.1% of the input laser light into one of the two output colors. Most of this inefficiency could be traced back to poor coupling between the microresonator ring and the waveguide.

Four nanophotonic resonators, each slightly different in geometry, generate different colors of visible light from the same near-infrared pump laser. Courtesy of NIST.
The researchers redesigned the straight waveguide to be U-shaped and to wrap around a portion of the ring. They designed broadband pulley-waveguide couplers using coupled-mode simulations. The pulley waveguides for broadband, near-critical coupling exploited the connection between the waveguide-resonator coupling rate and conversion efficiency. This modification made it possible for the team to convert about 15% of the incoming light to the desired output colors — more than 150× the amount that was converted in the previous experiments.

In addition, the converted light now demonstrated more than 1 mW of power over a range of wavelengths, from the visible to the near-infrared. The researchers estimated on-chip output powers for the signal and idler waves to be between 1 and 5 mW. This is enough power to generate quantum states of light, such as single-photon states, from single atoms or atom-like systems such as quantum dots. These milliwatt power levels can also provide sufficient power for laser stabilization.

Increasing the coupling between the ring and the waveguide and suppressing effects that could interfere with the color conversion further improved the power output and efficiency of the technique. These enhancements further increased the output laser power to as high as 20 mW and allowed as much as 29% of the incident laser light to be converted to the desired output colors. The researchers achieved high performance by suppressing competitive processes and by strongly overcoupling the output light.

By developing the methodology on a platform compatible with silicon photonics, the researchers have made it suitable for wide-scale deployment outside of laboratory settings.

The research was published in APL Photonics (www.doi.org/10.1063/5.0117691) and Nature Communications (www.doi.org/10.1038/s41467-022-35746-9).

Explore related content from Photonics Media




LATEST NEWS

Terms & Conditions Privacy Policy About Us Contact Us

©2024 Photonics Media