Photonics Dictionary: R

Reflectance spectroscopy is a technique used to analyze the reflective properties of materials across various wavelengths of the electromagnetic spectrum. By measuring the reflectance of light from a...

The term reflective is an adjective that describes the ability of a surface or material to reflect light or other forms of radiation. It implies the capability of bouncing back or redirecting...

The ratio of the intensity of the total radiation reflected from a surface to the total incident on that surface.

An instrument for measuring reflectance.

A type of conducting surface or material used to reflect radiant energy.

A lamp used in projection that is made with a reflector built into the bulb, normally by coating a portion of its interior with a reflective material to ensure the reflector's optimum position in...

A light ray that has had its direction altered because of its traversing an air-to-glass interface at some angle. In an optical waveguide, a ray that is refracted from the core into the cladding.

The technique for measuring the index profile of an optical fiber by scanning the entrance face with the vertex of a high numerical aperture cone and measuring the change in power of refracted...

A wave of radiation that has undergone refraction.

A prism that often is used as a dispersing element in spectrographs and monochromators.

A transparent sphere that has an index of refraction that is different from that of the medium surrounding it; used in optics to demonstrate refraction and astigmatic image formation.

The bending of oblique incident rays as they pass from a medium having one refractive index into a medium with a different refractive index.

A measure of the relative difference in refractive index between two optical materials. Most commonly used in fiber optics where the refractive index contrast, D, is given as follows: where n1 equals...

A closely spaced series of well-known chemicals having a refractive index lying between 1.33 for water and 1.95 for a solution of phosphorus in carbon disulfide. They are used to identify powdered...

The description of the refractive index along a fiber diameter.

The mean square difference in refractive index for two separate points in space.

An instrument used to measure the refractive index of solids and liquids. Several types exist, the most common being the Abbe refractometer.

The method used to determine the refractive index of a given substance.

Rate at which an image on a computer screen is redrawn (usually 50 or 60 Hz) to prevent flicker caused by the decay of the visual image.

A type of multiple-pass amplifier in which no optical leakage is allowed until a finite number of passes has occurred; at this time the entire cavity output is released as one pulse.

A repeater that is designed for digital transmission. Also called a regenerator.

Image processing operations performed on one area of an image.

A shift in the apparent position of an object when an optical element is added or removed.

The part of incident flux that is transmitted with no scattering.

The ratio of the diameter of the entrance pupil in an optical system to the equivalent focal length of that system. The relative aperture is denoted as a fraction in which f, the equivalent focal...

A figure of merit corresponding to the amount of light seen by a viewer through binoculars. A higher number indicates a brighter image in low-light situations. The relative brightness value is...

A plot showing how the response (ability to detect a signal) varies with wavelength. D(l).

The steady state of temperature exhibited by a material that has absorbed and emitted radiation equally.

The ratio of the velocities of light in two adjacent media, neither of which is air.

The inherent laser amplitude noise relative to the average optical power produced by the laser; the RIN decreases rapidly as current is increased.

The quantity equal to the refractive index of one medium divided by that of a second medium.

A form of lens assembly used in a projection system to maximize efficiency and assure uniform illumination of the object being projected.

A lens or lens system used to transfer a real image from one point within an optical system to another, with or without magnifying it.

The discernment of depth or apparent difference in distance that causes the object to stand out from its background because of stereoscopic vision. The impression of relief can be obtained from the...

The unit of the dose of any radiation that produces the same biological effect as one roentgen of x-ray.

A device employed to identify toxic agents lingering on the ground or in the air from up to three miles away, by using laser beams to detect infrared light-absorption patterns that can be analyzed to...

A display device, such as a cathode-ray tube, that is located at some distance from the source generating the displayed information.

Remote inspection refers to the process of inspecting, evaluating, or monitoring assets, equipment, infrastructure, or systems from a distance, typically using remote sensing technologies and...

A robotic process commonly employed by automakers that enables high-speed and flexible production throughput by using swiveling optics for precise beam positioning.

Remote sensing is a method of data collection and observation where information about objects, areas, or phenomena on Earth's surface is gathered from a distance, typically using sensors onboard...

The degree to which a predetermined or previous setting of a positioning device can be duplicated by observance of the optical phenomena.

A pulsed laser that emits a recurring pulsed output. Frequency of the pulses emitted is known as pulsed recurrence frequency (PRF). When the PRF or duty cycle is very high, repetitively pulsed lasers...

A reproduction made of an original grating -- usually by casting thermosetting plastics onto the original -- to avoid the high expense of making the original gratings.